c
d
NOTE:
To install both cards if equipped.
6
Follow the procedure in
After working inside your computer
.
Display Assembly
Removing the display assembly
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
NOTE:
To remove both cards if equipped and no need to remove the blank filler
c
d
e
f
3
Peel the tapes that secure the antenna cables to the system board and remove the cables from the routing clips.
4
Disconnect the :
a IR camera and touchscreen cable [1].
b Remove the 2 (M 2 x 1.7L) screws that secure the eDP bracket and lift it away from the computer [2].
c Disconnect the eDP cable from the system board [3].
d Disconnect the G-sensor and eDP cables [4].
24
Removing and installing components