1. Install the
.
2. Install the
.
3. Follow the procedure
after working inside your computer
.
Heatsink
Removing the heatsink fan assembly
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
1.
NOTE:
Heatsink and Fan are separately orderable parts.
Disconnect the fan cable from the connector on the system board [1].
2. Remove the two (M2x3) screws in sequence (2 > 1) on the fan case and four (M2x3) screws in sequence (4 > 3 > 2 > 1)
from the heatsink [2].
3. Lift and remove the heatsink fan assembly from the computer [3].
Removing and installing components
33
Summary of Contents for Latitude 7300
Page 19: ...4 Lift and remove the base cover from the computer Removing and installing components 19 ...
Page 56: ...3 Route the antennae and display cable along the hinges 56 Removing and installing components ...
Page 80: ...Figure 5 Power button board without FPR 80 Removing and installing components ...
