background image

Select 

System Password

, alter or delete the existing system password and press Enter or Tab.

Select 

Setup Password

, alter or delete the existing setup password and press Enter or Tab.

NOTE: 

If you change the System and/or Setup password, re-enter the new password when promoted. If you delete the 

System and/or Setup password, confirm the deletion when promoted.

Press Esc and a message prompts you to save the changes.

Press Y to save the changes and exit from System Setup.
The computer reboots.

Updating the BIOS in Windows 

It is recommended to update your BIOS (System Setup), when you replace the system board or if an update is available. For laptops, ensure 
that your computer battery is fully charged and connected to a power outlet

NOTE: 

If BitLocker is enabled, it must be suspended prior to updating the system BIOS, and then re-enabled after the BIOS 

update is completed.

Restart the computer.

Go to 

Dell.com/support

.

Enter the 

Service Tag

 or 

Express Service Code

 and click 

Submit

.

Click 

Detect Product

 and follow the instructions on screen.

If you are unable to detect or find the Service Tag, click 

Choose from all products

.

Choose the 

Products

 category from the list.

NOTE: 

Choose the appropriate category to reach the product page

Select your computer model and the 

Product Support

 page of your computer appears.

Click 

Get drivers

 and click 

Drivers and Downloads

.

The Drivers and Downloads section opens.

Click 

Find it myself

.

Click 

BIOS

 to view the BIOS versions.

Identify the latest BIOS file and click 

Download

.

10  Select your preferred download method in the 

Please select your download method below 

window, click 

Download File

.

The 

File Download

 window appears.

11  Click 

Save

 to save the file on your computer.

12  Click 

Run

 to install the updated BIOS settings on your computer.

Follow the instructions on the screen.

NOTE: 

It is recommended not to update the BIOS version for more than three revisions. For example: If you want to update the 

BIOS from 1.0 to 7.0, then install version 4.0 first and then install version 7.0.

Updating BIOS on systems with bitlocker enabled

CAUTION: 

If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it will not recognize the 

BitLocker key. You will then be prompted to enter the recovery key to progress and the system will ask for this on each reboot. If 
the recovery key is not known this can result in data loss or an unnecessary operating system re-install. For more information on 
this subject, see Knowledge Article: 

http://www.dell.com/support/article/us/en/19/SLN153694/updating-bios-on-systems-

with-bitlocker-enabled

Updating your system BIOS using a USB flash drive

If the system cannot load into Windows but there is still a need to update the BIOS, download the BIOS file using another system and save 
it to a bootable USB Flash Drive.

68

System setup

Summary of Contents for Latitude 7290

















































































Reviews: