6. Replace the:
a.
b.
c.
After working inside your tablet
.
Power Button Board
Removing the power-button board
Steps
Before working inside your tablet
.
2. Remove the:
a.
b.
c.
d.
3. Unroute the WLAN antenna cables from the routing guides on the computer [1].
4. Open the latch and disconnect the power-button board FPC from the connector on the system board [2].
5. Peel the power-button board FPC from the computer [1].
6. Open the latch and disconnect the fingerprint reader FFC from the power-button board [2].
Disassembly and reassembly
61
Summary of Contents for Latitude 7200 2-in-1
