manualshive.com logo in svg

Dell Latitude 5495, Owner'S Manual

Share
Download
Dell Latitude 5495 Owner'S Manual Download Page 84

Option

Description

Default Setting: Enable Strong Password is not selected.

NOTE: 

If Strong Password is enabled, Admin and System passwords must contain at least one uppercase 

character, one lowercase character and be at least 8 characters long.

Password 
Configuration

Allows you to determine the minimum and maximum length of Administrator and System passwords.

Password Bypass

Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they 
are set. The options are:

•

Disabled

•

Reboot bypass

Default setting: Disabled

Password Changes

Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is 
set.
Default setting: 

Enable Non-Admin Password Changes

 is selected.

Non-Admin Setup 
Changes

Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set. 
If disabled the setup options are locked by the admin password. The option “Allow Wireless Switch changes" is 
disabled by default

UEFI Capsule 
Firmware Updates

Allows yout to control whether this system allows BIOS updates via UEFI capsule update packages.

•

Enable UEFI Capsule Firmware Updates

 (enabled by default)

Computrace 

Allows you to activate or disable the optional Computrace software The options are:

•

Deactivate computrance

•

Disable computrance

•

Activate computrance

NOTE: 

The Activate and Disable options will permanently activate or disable the feature and no further 

changes will be allowed

Enable Admin 
Setup Lockout

Allows you to prevent users from entering Setup when an Administrator password is set.
Default Setting: Disabled

Secure Boot screen options

Option

Description

Secure Boot 

The option 

Enable Secure Boot 

is selected by default.

Expert Key 
Management

Allows you to manipulate the security key databases only if the system is in Custom Mode. The 

Enable Custom 

Mode

 option is disabled by default. The options are:

•

PK

•

KEK

 (default)

•

db

 (default)

•

dbx

 (default)

If you enable the 

Custom Mode

, the relevant options for 

PK, KEK, db, and dbx

 appear. The options are:

84

System setup options

Summary of Contents for Latitude 5495






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands