Rear-I/O bracket
Removing the rear-I/O bracket
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
4. Remove the
.
5. Remove the
.
6. Remove the
.
About this task
The following image indicates the location of the rear-I/O bracket and provides a visual representation of the removal
procedure.
Steps
1. Remove the screw (M3x5) that secures the power-supply socket to the rear-I/O bracket.
2. Remove the power-supply cable from the routing guide on the rear-I/O bracket.
3. Slide and remove the power-supply socket away from the rear-I/O bracket.
4. Remove the three screws (M3x5) that secure the rear-I/O bracket to the display-assembly base.
5. Lift the rear-I/O bracket off the display-assembly base.
Removing and installing components
57
