Option
Description
Enable VT for Direct I/O: This option is enabled by default.
Trusted Execution
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional hardware
capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization Technology, and Virtualization
technology for direct I/O must be enabled to use this feature.
Trusted Execution: This option is disabled by default.
Wireless screen options
Option
Description
Wireless Switch
Allows to set the wireless devices that can be controlled by the wireless switch. The options are:
•
WWAN
•
GPS (on WWAN Module)
•
WLAN
•
Bluetooth
All the options are enabled by default.
NOTE:
For WLAN and WiGig enable or disable controls are tied together and they cannot be enabled or
disabled independently.
Wireless Device
Enable
Allows you to enable or disable the internal wireless devices.
•
WWAN/GPS
•
WLAN
•
Bluetooth
All the options are enabled by default.
Maintenance screen options
Option
Description
Service Tag
Displays the Service Tag of your computer.
Asset Tag
Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
BIOS Downgrade
This controls flashing of the system firmware to previous revisions.
•
Allows BIOS Downgrade (enabled by default)
Data Wipe
This field allows users to erase the data securely from all internal storage devices. The following is list of devices
affected:
•
Internal SATA HDD/SSD
•
Internal M.2 SATA SDD
•
Internal M.2 PCIe SSD
•
Internal eMMC
BIOS Recovery
This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user primary hard
drive or an external USB key.
System setup options
81
