Installing system board
1
Align the system board with the screw holders on the computer.
2
Replace the four M2x3 screws to secure the system board to the system.
3
Place the metal bracket to secure the DisplayPort over USB Type-C.
4
Replace the two M2x3 screws to secure the metal bracket on the DisplayPort over USB Type-C.
5
Connect the power connector port cable to the connector on the system board.
6
Connect the display cable to the connector on the system board.
7
Place the display cable metal bracket to its place over the display cable.
8
Replace the two M2x3 screws to secure the metal bracket.
9
Connect the following cables:
a Touchpad cable
b LED board cable
c USH board cable
d speaker cable
10 Install the:
a
b
c
d
e
f
g
h
Removing and installing components
39