Installing the SSD frame
1
Place the SSD frame to the slot in the system.
2
Replace the single (M2x3) screw that secures the SSD frame to the system.
3
Install the:
a
b
c
4
Follow the procedure in
After working inside your computer
.
Hard drive
Removing hard drive
1
Follow the procedure in
Before working inside your computer
.
2
Remove the :
a
b
3
To remove the hard drive:
a Disconnect the hard drive cable from the connector on the system board [1].
b Remove the four (M2 x 2.7+2.7) screws that secure the hard drive to the system [2].
c Lift the hard drive away from the system.
Removing and installing components
17