Dell Latitude 5424 Rugged Owner'S Manual Download Page 10

Page: 10 / 210

Latitude 5414

Latiude 5424 Rugged

Memory

DDR4 2133 MHz; 2 SoDIMM slots

supporting up to 32 GB

•

DDR4 2133 MHz; 2 SoDIMM slots

supporting up to 32 GB (SkyLake U)

•

DDR4 2400 MHz; 2 SoDIMM slots

supporting up to 32 GB (KabyLake U)

Storage

•

None

•

2.5'' HDD: Up to 1 TB, hybrid, OPAL SED

options

•

SSD M.2 2280 SATA: Up to 512 GB,

OPAL SED options

•

5.25" ODD (Optional)

•

SSD M.2 2280 PCIe: Up to 1 TB, FIPS,

OPAL, SED options

•

SSD M.2 2280 SATA: Up to1 TB, FIPS,

OPAL, SED options

•

5.25" ODD (Optional, can be used as

third drive)

•

2.5'' HDD: Up to 1 TB, hybrid, OPAL SED

options

Graphics

Integrated

Intel HD 520 Graphics (Integrated in Intel

6th generation processors OR Radeon R7

M360 (Discrete)

Integrated

•

Intel HD Graphics 620 (Integrated in Intel

7th generation processors)

•

Intel UHD Graphics 620 (Integrated in

Intel 8th generation processors)

•

Intel HD 520 Graphics (Integrated in Intel

6th generation processors)

Discrete

•

AMD Radeon 540, 2 GB GDDR5

•

AMD Radeon RX540, 4 GB GDDR5

Audio

Realtek ALC3235 Controller

Waves MaxxAudio 7.5

Communication

•

Integrated Intel i219 10/100/1000 Mb/s

Ethernet

•

Wi-Fi 802.11a/b/g/n/ac with Bluetooth

4.2

•

WWAN 4G LTE Full Mini Card (optional)

•

Optional dedicated u-blox NEO-M8 GPS

card

•

Integrated Intel i219 10/100/1000 Mb/s

Ethernet

•

Wi-Fi 802.11a/b/g/n/ac with Bluetooth

4.2

•

WWAN 4G LTE Full Mini Card (optional)

•

Bluetooth 4.2

•

Optional dedicated u-blox NEO-M8 GPS

card

I/O connectors

•

Three USB 3.1 ports(One with

PowerShare)

•

One USB 2.0

•

HDMI 1.4

•

VGA Port

•

Two RJ-45 NIC ports

•

Two RS-232 Serial ports

•

One microphone/stereo headphone/

speakers connector

•

one micro-SIM slot with security feature

•

Four USB 3.1 Gen 1 ports (One with

PowerShare and Power on/Wake-up

support)

•

HDMI 2.0

•

One USB 3.2 Gen 2 Type-C

port(Supports charging)

•

Universal audio jack (Global Headset

Jack + mic phone in + line in support)

•

RJ-45 connector

•

Serial RS-232 port

Rear I/O space can be configured with

RJ-45 along with following options:

•

Blank - no IO, blank bezel (FACTORY

DEFAULT)

•

Serial RS-232

•

VGA or

•

DisplayPort

Welcome - Getting Started

Summary of Contents for Latitude 5424 Rugged



















































































































































































































Search results

Summary of Contents for Latitude 5424 Rugged

Reviews:

Dell Latitude 5424 Rugged, Owner'S Manual, Page: 10 / 210

Search results

Summary of Contents for Latitude 5424 Rugged

Reviews: