Dell Latitude 5310 Service Manual Download

Page: 115 / 115

Getting help

Topics:

•

Contacting Dell

Contacting Dell

Prerequisites

NOTE:

If you do not have an active Internet connection, you can find contact information on your purchase invoice,

packing slip, bill, or Dell product catalog.

About this task

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services
may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

Steps

1. Go to

Dell.com/support.

2. Select your support category.
3. Verify your country or region in the

Choose a Country/Region

drop-down list at the bottom of the page.

4. Select the appropriate service or support link based on your need.

Getting help

115

Summary of Contents for Latitude 5310




















































































































Search results

Summary of Contents for Latitude 5310

Reviews:

Related manuals for Latitude 5310

Brands by name

Popular brands

Dell Latitude 5310, Service Manual

Search results

Summary of Contents for Latitude 5310

Reviews:

Related manuals for Latitude 5310

Brands by name

Popular brands