3
Connect the coin-cell battery cable to the system board.
1
Install the
.
2
Install the
.
3
Follow the procedure in
After working inside your computer
Solid-state drive
Removing the M.2 2280 solid-state drive
1
Follow the procedure in
Before working inside your computer
2
Remove the
.
3
Remove the
.
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
1
Remove the screw (M2x2.5) that secures the solid-state drive to the system board.
2
Slide and remove the solid-state drive off the solid-state drive slot on the system board.
Installing the M.2 2280 solid-state drive
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of the solid-state drive and provides a visual representation of the installation procedure.
20
Removing and installing components
