Solid State Drive (SSD)
Removing M.2 Solid State Drive (SSD)
If the system is shipped with M.2 SSD perform the following steps.
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
3
To remove the SSD:
a Remove the M2.0x3.0 screw that secures the SSD card [1].
b Slide and lift the SSD card from the system board [2].
Installing M.2 Solid State Drive (SSD)
NOTE:
If the system is shipped with SSD perform the following steps.
1
Align the notch on the SSD card with the tab on the SSD card connector and slide the card into the slot.
2
Align the screw hole on the SSD card with the screw hole on the system board.
3
Replace the screw that secures the SSD card to the system board.
4
Install the:
a
b
c
Removing and installing components
13
