Dell Latitude 3120, Service Manual

Page: 37 / 90

Steps
1. Insert the world-facing camera module into the slot on the computer chassis.
2. Replace the single screw (M2.5x2.5) to secure the front-facing camera module to the computer chassis.
3. Connect the world-facing camera cable to the connector on the camera module.
Next steps
1. Install the palmrest and keyboard assembly .
2. Follow the procedure in after working inside your computer .
Heatsink assembly
Removing the heatsink assembly
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the palmrest and keyboard assembly .
About this task
The following images indicate the location of the heatsink assembly and provide a visual representation of the removal
procedure.
Removing and installing components 37