888-24-116-W-00 rev.A • 05/10
ENGLISH
4 / 32
Set-Up and Go
1
Ensure handles are securely attached to MCS
2
Insert Netbooks into docks
3
First Time Battery Charge
Monitoring Netbook Power
Using the provided keys, unlock the two top compartment
doors. Lift the doors up and out, allowing the doors to drop
slightly, then lift the doors up and push them under the
work surface.
Insert the Netbooks into the docks with the front edge of
the Netbook at the top and the power/Ethernet connectors
leading into the docking station.
The green tab at the front of the dock will be visible if the
Netbook has been properly seated.
Charging activity can be viewed at the top edge of each
Netbook when docked.
CAUTION:
To avoid injury or equipment damage,
ensure area is clear before closing upper doors.
Eight screws (four at each handle) and a hex tool have been provided to attach one
handle at each side of the MCS work surface.
Before using the Netbooks for the fi rst time or after they have spent some
time in storage, ensure that the Netbooks have a full (100%) charge.
Connect the MCS power cable to a dedicated circuit, (one that is not
being shared with other devices).
Verify that the blue light on the Power/Fault Status Indicator near the
MCS work surface is lit.
Prior to fi rst time use, allow the Netbooks to charge in the MCS for at
least 2-3 hours before removing them from the docks.
T
he Power/Fault Status Indicator lights near the MCS work surface communicate the following conditions.
NOTE:
Charge status of individual Netbooks can be seen directly on Netbooks when docked and the upper compartment doors are open.
CAUTION:
Observe all the safety precautions related to the Dell MCS
operation and maintenance included in this reference guide! Failure to
follow the safety precautions may result in injury or damage to equipment.
Blue light, solid
Power "ON"
Amber light, fl ashing
Maximum temperature has been exceeded
* When recommended temperature has been exceeded, power to the
Netbooks is terminated. Charging resumes once the temperature falls within
an acceptable operating range.
CAUTION:
There is no on/off switch on this equipment; the only power disconnect is the AC power cable.
Therefore, the socket outlet should be easily accessible and should be installed near the equipment.
Green tab
location
Netbook charge
indicator
Power/Fault Status Indicator
Signal
Meaning