Display Assembly: Dell Inspiron 8600 Service Manual
CAUTION:
Before performing the following procedures, read the safety instructions
in your
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or
by periodically touching an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in "
Preparing to Work Inside the Computer
."
2. Remove the
3. Remove the
.
4. Use a plastic scribe to pry the eight display bumpers out of the screw holes located on the front
of the bezel.
5. Remove the eight M2.5 x 6-mm screws located on the front of the bezel.
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to the
bezel.
6. Starting at the bottom of the display panel (by the DELL™ logo), use your fingers to separate
the bezel from the top cover by lifting the inside edge of the bezel away from the top cover.
Display Panel
CAUTION:
Before performing the following procedures, read the safety instructions
in your
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
1. Follow the instructions in "
Preparing to Work Inside the Computer
."
2. Remove the
3. Remove the
.
4. Remove the
.
5. Remove the nine M2 x 3-mm screws from the display panel.
6. Lift the display panel, and rotate the display panel out of the top cover.
7. Remove the yellow tape from the top display connector.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS...UT%20PARALLEL%20SERIAL_SERV_MAN/display.htm (5 of 7)6/21/2004 1:14:20 AM
