Dell Inspiron 7520 Owner'S Manual Download

Page: 55 / 86

Technology and components

This chapter details the technology and components available in the system.

Topics:

•

•

•

•

Power adapter

This laptop is shipped with 180 W power adapters.

WARNING:

When you disconnect the power adapter cable from the laptop, grasp the connector, not the cable itself, and then

pull firmly but gently to avoid damaging the cable.

WARNING:

The power adapter works with electrical outlets worldwide. However, power connectors and power strips vary

among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may
cause fire or equipment damage.

Processors

Latitude 7520 is shipped with any of the following processors:

7th generation processors (KabyLake)

•

Intel Core Xeon E3-1535M v6 (Quad Core Xeon 3.10GHz, 4.20GHz Turbo, 8MB 45W)

•

Intel Core Xeon E3-1505M v6 (Quad Core Xeon 3.00GHz, 4.00GHz Turbo, 8MB 45W)

•

Intel Core i7-7920HQ (Quad Core 3.10GHz, 4.10GHz Turbo, 8MB 45W)

•

Intel Core i7-7820HQ (Quad Core 2.90GHz, 3.90GHz Turbo, 8MB 45W)

•

Intel Core i7-7700HQ (Quad Core 2.80GHz, 3.80GHz Turbo, 6MB 45W)- non vPro

•

Intel Core i5-7440HQ (Quad Core 2.80GHz, 3.80GHz Turbo, 6MB 45W)

•

Intel Core i5-7300HQ (Quad Core 2.50GHz, 3.50GHz Turbo, 6MB 45W)

6th generation processors (SkyLake)

•

Intel Core Xeon E3-1575M v5 (Quad Core Xeon 3.00GHz, 3.90GHz Turbo, 8MB 45W)

•

Intel Core Xeon E3-1545M v5 (Quad Core Xeon 2.90GHz, 3.80GHz Turbo, 8MB 45W)

•

Intel Core i7-6920HQ (Quad Core 2.90GHz, 3.80GHz Turbo, 8MB 45W)

•

Intel Core i7-6820HQ (Quad Core 2.70GHz, 3.60GHz Turbo, 8MB 45W)

NOTE:

The clock speed and performance varies depending on the workload and other variables.

Kaby Lake — 7th Generation Intel Core processors

The 7th Gen Intel Core processor (Kaby Lake) family is the successor of 6th generation processors (Skylake). It's main features include:

Technology and components

Summary of Contents for Inspiron 7520























































































Search results

Summary of Contents for Inspiron 7520

Reviews:

Related manuals for Inspiron 7520

Brands by name

Popular brands

Dell Inspiron 7520, Owner'S Manual

Search results

Summary of Contents for Inspiron 7520

Reviews:

Related manuals for Inspiron 7520

Brands by name

Popular brands