Dell Inspiron 5676 Service Manual Download

Page: 91 / 120

Replacing the slim optical drive

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Topics:

•

Procedure

•

Post-requisites

Procedure

Align and snap the slim optical-drive bezel to the optical drive.

Place the slim optical-drive assembly on the slim optical-drive bracket and snap the slim optical-drive assembly in place.

Slide the slim optical-drive assembly into the slim optical-drive bay through the front of the computer.

Connect the data cable and power cable to the optical drive.

Replacing the slim optical drive

Summary of Contents for Inspiron 5676

























































































































Search results

Summary of Contents for Inspiron 5676

Reviews:

Related manuals for Inspiron 5676

Brands by name

Popular brands

Dell Inspiron 5676, Service Manual

Search results

Summary of Contents for Inspiron 5676

Reviews:

Related manuals for Inspiron 5676

Brands by name

Popular brands