Dell Inspiron 5676 Service Manual Download Page 57

Page: 57 / 120

Removing the left-side cover

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Topics:

•

Prerequisites

•

Procedure

Prerequisites

Remove the

right-side cover

Procedure

Lay the computer on the left side and remove the two screws (M3x5) that secure the left-side cover to the chassis.

Carefully turn over the computer.

Slide and lift the left-side cover off the chassis.

Removing the left-side cover

Summary of Contents for Inspiron 5676

























































































































Search results

Summary of Contents for Inspiron 5676

Reviews:

Related manuals for Inspiron 5676

Brands by name

Popular brands

Dell Inspiron 5676, Service Manual

Search results

Summary of Contents for Inspiron 5676

Reviews:

Related manuals for Inspiron 5676

Brands by name

Popular brands