Removing the display assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
.
Prerequisites
1. Remove the
.
2. Remove the
.
Procedure
1. Peel off the tape that secures the fan cable to the palm-rest and keyboard assembly.
2. Disconnect the fan cable from the system board.
3. Peel off the tape that secures the touchscreen cable and the display cable to the system board.
4. Peel off the tape that secures the touchscreen cable and the display cable to their respective connectors on the system
board.
5. Open the latch, and disconnect the touchscreen cable from the system board.
6. Open the latch, and disconnect the display cable from the system board.
7. Turn the computer over, and open the display as far as possible. Then place the computer face down on a flat surface.
CAUTION:
Place the computer on a soft and clean surface to avoid scratching the display.
8. Remove the antenna cables from the routing guides on the palm-rest and keyboard assembly.
9. Remove the six screws (M2.5x4) that secure the display assembly to the palm-rest and keyboard assembly.
10. Remove the two screws (M2x3) that secure the display assembly to the palm-rest and keyboard assembly.
11. Gently lift the display assembly off the palm-rest and keyboard assembly.
30
54
Removing the display assembly
Summary of Contents for Inspiron 5481
