Steps
1. Lay the computer with its right side facing down.
2. Press the release lever down and then push it away from the processor to release it from the securing tab.
CAUTION:
When removing the processor, do not touch any of the pins inside the socket or allow any objects to fall
on the pins in the socket.
3. Extend the release lever completely and open the processor cover.
4. Gently lift the processor from the processor socket on the system board.
Installing the processor
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE:
If either the processor or the fan and heat-sink assembly is replaced, use the thermal grease provided in the kit
to ensure that thermal conductivity is achieved.
The following image(s) indicate the location of the processor and provides a visual representation of the installation procedure.
Removing and installing components
39