Dell Inspiron 3700 Reference Manual Download | Manualshive

Page: 15 / 185

background image

8.

Click

OK

. Then click

OK

again to close the Softex window.

For the latest information on these services and their use, and to view the Softex software user

’

s guides, see the Web site at

http://www.dell.com/us/en/bsd/topics/products_latit_softex.htm

.

Installing Devices in the Media Bay Without Softex Docking Services or Softex BayManager

To install a device in the media bay, perform the following steps:

1.

Verify that the

Diskette Reconfig

option in the System Setup program is set to

Any Time

.

2.

Save your work and close all open files and application programs.

3.

Turn your computer off.

4.

If the computer is docked, undock it.

5.

If the media bay contains a device, remove the device as follows:

a.

Close the computer display and turn the computer over.

b.

Slide the media bay latch toward the

Unlock

icon.

Keep holding the media bay latch with one hand while pulling the device out of the bay with the other hand.

c.

After you remove the device, release the media bay latch.

6.

Slide the new device firmly into the media bay.

You should hear a click when the device is fully seated.

7.

Dock the computer if necessary.

8.

Turn on the computer.

Using the Diskette Drive

Your computer was shipped with a 3.5-inch diskette drive (see

) in the media bay. To use another device in the media bay, first remove

the diskette drive. For detailed instructions on installing devices in the media bay, see "Using the Media Bay" in Chapter 2 of the

Reference and

Troubleshooting Guide.

The diskette drive lets you install programs and transfer data using 3.5-inch diskettes.

Figure 1. Diskette Drive Installed in Computer

To use the diskette drive, insert a 3.5-inch diskette into the drive (label side up and metal end first). Push the diskette into the drive until the eject
button extends outside the drive casing.

To remove a diskette from the drive, press the eject button to release the diskette, and then pull the diskette out of the drive.

When data is being accessed from the diskette drive in the media bay, the drive access indicator blinks.

NOTE: If the computer is docked to the advanced port replicator (APR), turn off the computer and undock it before
installing or removing a diskette drive.

NOTICE:

Do not travel with a diskette in the diskette drive. Doing so could break the eject button and damage the

drive.

NOTE: You can use the diskette drive externally by connecting it to the parallel port connector on the back of the

computer. If you are running the Microsoft Windows 98 operating system on your computer and the

Diskette Reconfig

option is enabled in the System Setup program, you do not have to reboot the computer when you connect the diskette
drive to the parallel port connector. If you are running the Microsoft Windows NT operating system on your computer, you
do need to reboot the computer after you connect the diskette drive.

«
...
13
14
15
16
17
...
»

Summary of Contents for Inspiron 3700


























































































































































































Reviews:

No comments

Related manuals for Inspiron 3700

Brand: Gateway Pages: 78

Brand: Gateway Pages: 7

Brand: Acer Pages: 9

TravelMate 2200

Brand: Acer Pages: 106

Brand: Acer Pages: 9

Brand: Acer Pages: 102

Brand: Acer Pages: 102

Aspire Timeline 4810TZ

Brand: Acer Pages: 148

Predator Triton 500

Brand: Acer Pages: 9

GS65 Stealth THIN-053

Brand: MSI Pages: 108

Brand: Macrovision Corporation Pages: 212

Brand: Tandy Pages: 71

Brand: MSI Pages: 16

StepNote VA2001T

Brand: Everex Pages: 1

Brand: Fujitsu Pages: 133

Brand: HP Pages: 2

Pavilion dv9900 Series

Brand: HP Pages: 8

Pavilion dv6900 Series

Brand: HP Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands