Dell Inspiron 3656, Service Manual

Page: 46 / 97

Removing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer . After working inside your computer, follow
the instructions in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
1 Align and snap the optical-drive bezel to the optical drive.
2 Align the screw holes on the optical-drive bracket with the screw holes on the
optical drive.
3 Replace the screws that secure the optical-drive bracket to the optical drive.
4 Slide the optical-drive module into the optical-drive bay through the front of the
chassis.
5 Replace the screw that secures the optical-drive assembly to the chassis.
6 Open the side-chassis.
7 Connect the data cable and the power cable to the optical drive.
8 Connect the data cable and the power cable to the hard drive.
9 Close the side-chassis.
Post-requisites
1 Replace the front bezel .
2 Replace the computer cover .
46