Replacing the front-panel light
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the lighting modules with the screw holes on
the chassis.
2
Replace the screws that secure the lighting module to the chassis.
3
Slide the cable through the side-chassis and open the side-chassis.
4
Route the lighting cable through the routing guides on the chassis.
5
Connect the lighting cable to the system board.
6
Close the side-chassis.
Post-requisites
1
Replace the
front bezel
.
2
Replace the
computer cover
.
71
Summary of Contents for Inspiron 3655
