Replacing the Front I/O-Panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Insert the front I/O panel clamps into the slots on the front panel.
2
Slide the front I/O panel towards the top. Ensure that the screw hole on
the front I/O panel aligns with the screw hole on the front panel.
3
Replace the screw that secures the front I/O panel to the front panel.
4
Route the front I/O panel cables through the routing guides on the
chassis.
5
Connect the front I/O panel cables to the system-board connectors
(USBF1, USBF2, and AUDIOF1).
For more information on the location of the cable connectors, see
“System-Board Components”
.
Post-requisites
1
Follow the procedure from step 3 to step 6 in “Replacing the
drive cage
”.
2
Replace the
front bezel
.
3
Replace the
computer cover
.
41
