Installing display assembly
1. Place the display assembly to align with the screw holders on the .
NOTE:
Close the LCD before inserting the screws or turning over the laptop.
CAUTION:
Route the display and antenna cable through the LCD hinge mount holes as LCD assembly is
inserted into the base, to prevent possible cable damage.
2. Tighten the M2x5 screws to secure the display assembly to the .
3. Turn over the .
4. Connect the antenna cables and display cable to the connectors.
5. Place the display cable bracket over the connector and tighten the M2x5 screws to secure the display cable to the .
6. Install the:
a.
b.
c.
d.
After working inside your computer
.
Display bezel
Removing the display bezel
Before working inside your computer
.
2. Remove the:
a.
b.
c.
d.
e.
f.
3. Pry the edges [1,2,3,4] to release the display bezel from the display assembly.
Disassembly and reassembly
41