Installing the battery
NOTE:
68Whr battery can be used with either a M.2 or 7mm SATA drive.
1. Insert the battery into the slot on the .
2. Connect the battery cable to the connector on the system board.
3. Tighten the M2.5x5 screw to secure the battery to the .
4. Install the
.
After working inside your computer
.
Solid State Drive
Removing the M.2 Solid State Drive - SSD
Before working inside your computer
.
2. Remove the:
a.
b.
3. To remove the SSD:
a. Remove the two M2x3 screw [1] that secures the SSD to the .
b. the SSD card from the [3].
NOTE:
For models shipped with NVMe SSDs, remove the thermal plate placed over the SSD.
14
Disassembly and reassembly
