Installing the power connector port
1. Insert the power connector port into the slot on the .
2. Place the metal bracket on the power connector port.
3. Tighten the M2x3 screw to secure the metal bracket to the power connector port on the .
4. Connect the power connector port cable to the connector on the system board.
5. Install the:
a.
b.
After working inside your computer
.
Chasis Frame
Removing the chassis frame
Before working inside your computer
.
2. Remove the:
a.
b.
c.
d.
e.
3. To release the chassis frame:
Disassembly and reassembly
27