Installing the M.2 Solid State Drive - SSD
1. Place the SSD clip on the .
2. Tighten the M2x3 screw that secures SSD clip to the .
3. Insert the SSD into the socket on the .
4. ighten the M2x3 screw to secure the SSD to the .
5. Install the:
a.
b.
After working inside your computer
.
Hard drive
Removing hard drive assembly
Before working inside your computer
.
2. Remove the:
a.
b.
3. To remove the hard drive assembly:
a. Disconnect the hard drive cable from the connector on the system board [1].
b. Remove the screws that secure the hard drive assembly to the computer [2].
Disassembly and reassembly
15