Dell Inspiron 3420 Service Manual Download Page 63

Page: 63 / 119

About this task

The following image indicates the location of the heatsink assembly and provides a visual representation of the installation
procedure.

Steps

1. Align and place the heatsink assembly into the slot on the system board.
2. Tighten the four captive screws (in order, 1>2>3>4) to secure the heatsink assembly to the system board.

Next steps

1. Install the

base cover

2. Exit the

service mode

3. Install the

SIM card tray

for systems enabled with 4G LTE.

4. Install the

microSD-card

5. Follow the procedure in

after working inside your computer

Power adapter port

Removing the power adapter port

Prerequisites

1. Follow the procedure in

before working inside your computer

2. Remove the

microSD-card

3. Remove the

SIM card tray

for 4G LTE enabled systems.

4. Enter the

service mode

5. Remove the

base cover

Removing and installing components

Summary of Contents for Inspiron 3420
























































































































Search results

Summary of Contents for Inspiron 3420

Reviews:

Dell Inspiron 3420, Service Manual, Page: 63 / 119

Search results

Summary of Contents for Inspiron 3420

Reviews: