manualshive.com logo in svg

Dell Inspiron 3200, Service Manual

Share
Download
Dell Inspiron 3200 Service Manual Download Page 93

Removing and Replacing Parts

4-57

12.1

-Inch LCD Components

The 12.1-inch LCD assembly consists of the following components:

•

Front bezel

•

LCD panel

•

Inverter board and cable

•

Hinges

•

Bracket

•

Back cover

•

LCD flex cable

The following subsections provide removal and replacement procedures for 
these components and assumes that the 12.1-inch LCD assembly has been 
removed from the computer. See “LCD Assembly” found earlier in this chapter.

12.1-Inch LCD Front Bezel

Figure 4-40.  12.1-Inch LCD Front Bezel Removal 

To remove the 12.1-inch LCD front bezel, follow these steps:

1. Remove the LCD assembly.

See “LCD Assembly” found earlier in this chapter.

2. Use a dental pick to pry the front-bezel screw covers and upper bumpers out 

of the screw holes in the bezel.

bezel screw 
covers (2)

(screws F1– F4 
are 5 mm)

F1

F2

front bezel

F3

F4

5 mm

upper bumpers (2)

Summary of Contents for Inspiron 3200

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands