Removing the display assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
.
Topics:
•
•
Prerequisites
1. Remove the
.
2. Remove the
.
3. Remove the
.
Procedure
1. Remove the screw (M2x3) that secures the display-cable bracket to the system board.
2. Lift the display-cable bracket off the system board.
3. Peel off the tape to access the display cable.
4. Open the latch and disconnect the display cable.
27
48
Removing the display assembly
Summary of Contents for Inspiron 3185
