Dell Inspiron 27 7710 All-in-One, Service Manual, Page: 25 / 85

Steps
1. Align the slots on the system-board shield with the ports on the computer.
2. Replace the four screws (M3x5) that secure the system-board shield to the display-assembly base.
Next steps
1. Install the I/O cover .
2. Install the back cover .
3. Install the stand .
4. Follow the procedure in After working inside your computer .
Memory module
Removing the memory module
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the stand .
3. Remove the back cover .
4. Remove the I/O cover .
5. Remove the system-board shield .
About this task
The following image indicates the location of the memory modules and provides a visual representation of the removal
procedure.
Removing and installing components 25