Back to Contents Page
Battery Latch Assembly
Dell™ Inspiron™ 1764 Service Manual
Removing the Battery Latch Assembly
Replacing the Battery Latch Assembly
Removing the Battery Latch Assembly
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Follow the instructions from
step 3
to
step 19
in
Removing the System Board
.
4.
Remove the screw that secures the battery release latch to the battery latch assembly.
5.
Remove the battery latch spring from the battery latch assembly and the computer base.
6.
Remove the battery latch assembly from the computer base.
Replacing the Battery Latch Assembly
1.
Follow the procedures in
Before You Begin
.
2.
Place the battery latch assembly into the computer base.
3.
Hook the battery latch spring to the battery latch assembly and then to the computer base.
4.
Hold the battery release latch in place and replace the screw that secures the battery release latch to the battery latch assembly.
5.
Follow the instructions from
step 5
to
step 24
in
Replacing the System Board
.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on the back of the computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
battery latch spring
2
screw
3
battery latch assembly
4
battery release latch
