Dell Inspiron 1545 Service manual Service Manual Download Page 48

Page: 48 / 51

Great user manuals database on

UserManuals.info

13.

Disconnect the thermal fan cable, speaker cable, and USB board cable from the respective system board connectors.

14.

Lift the system board at an angle toward the side of the computer and out of the computer base.

15.

If required, remove any installed Mini-Card (see

Removing the Mini-Card

Replacing the System Board

If required, replace Mini-Card, (see

Replacing the Mini-Card

Replace the system board in the computer base.

Connect the thermal fan cable, speaker cable, and USB board cable to the respective system board connectors.

Replace the four screws that secure the system board to the computer base.

Replace the daughter board (see

Replacing the Daughter Board

Replace the palm rest (see

Replacing the Palm Rest

Replace the display assembly (see

Replacing the Display Assembly

Replace the processor heat sink and the processor (see

Replacing the Processor Heat Sink

and

Installing the Processor

Replace any installed memory modules (see

Replacing the Memory Module(s)

10.

Replace the base cover (see

Replacing the Base Cover

11.

Replace the keyboard (see

Replacing the Keyboard

12.

Replace the center control cover (see

Replacing the Center Control Cover

13.

Replace the optical drive (see

Replacing the Optical Drive

14.

Replace the hard drive (see

Replacing the Hard Drive

15.

Reinstall the ExpressCards in the ExpressCard slot, if any.

16.

Slide the battery into the battery bay until it clicks into place.

17.

Turn on the computer.

18.

Insert the BIOS upgrade CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear on the
screen.

Back to Contents Page

3 speaker cable connector

4 system board

5 screws (4)

NOTICE:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in

damage to the computer.

NOTE:

After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.

Summary of Contents for Inspiron 1545 Service manual




















































Search results

Summary of Contents for Inspiron 1545 Service manual

Reviews:

Related manuals for Inspiron 1545 Service manual

Brands by name

Popular brands

Dell Inspiron 1545 Service manual, Service Manual

Search results

Summary of Contents for Inspiron 1545 Service manual

Reviews:

Related manuals for Inspiron 1545 Service manual

Brands by name

Popular brands