Dell Inspiron 1520 Service Manual Download | Manualshive

Page: 51 / 66

background image

WPAN Card

1.

Insert the WPAN card connector at a 45-degree angle into the system board connector labeled "WPAN".

2.

Press the other end of the WPAN card down into the securing tabs until the card clicks into place.

3.

Connect the blue antenna cable to the WPAN card.

4.

Secure unused antenna cables in the protective mylar sleeve.

5.

Replace the cover and tighten the captive screws.

Back to Contents Page

NOTICE:

The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and

realign the card.

NOTICE:

To avoid damage to the WPAN card, never place cables under the card.

«
...
49
50
51
52
53
...
»

Summary of Contents for Inspiron 1520



































































Reviews:

No comments

Related manuals for Inspiron 1520

Brand: IBM Pages: 503

Brand: DT Research Pages: 4

Brand: Clevo Pages: 232

Brand: Asus Pages: 30

Brand: Asus Pages: 72

1015PEM-PU17-BK

Brand: Asus Pages: 61

Brand: Asus Pages: 110

Brand: Asus Pages: 62

Brand: Asus Pages: 102

Brand: Asus Pages: 64

Brand: Asus Pages: 120

Brand: Asus Pages: 66

Brand: Asus Pages: 62

1008P-KR-PU17-BR

Brand: Asus Pages: 66

1002HA - Eee PC - Atom 1.6 GHz

Brand: Asus Pages: 58

Brand: Asus Pages: 128

Brand: Asus Pages: 94

Brand: Asus Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands