Dell Inspiron 15 5000 Series, Service Manual

Page: 98 / 121

Replacing the sensor board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer . After working inside your computer, follow
the instructions in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
1 Align the screw hole on the sensor board with the screw hole on the display-
panel assembly and snap the sensor board in place.
2 Slide the sensor-board cable into the connector on the sensor board and close
the latch to secure the cable.
3 Adhere the tape on the sensor-board connector to secure the cable.
4 Replace the screw that secures the sensor board to the display-panel assembly.
Post-requisites
1 Follow the procedure from step 5 to step 6 in “ Replacing the display panel ”.
2 Replace the display assembly .
3 Replace the battery .
4 Replace the base cover .
98