Replacing the display hinges
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1
Slide the hinges under the latches on the display back-cover.
2
Align the screw holes on the display hinges with the screw holes on the display
back-cover.
3
Replace the screws that secure the display hinges to the display back-cover.
Post-requisites
1
Replace the
2
Replace the
.
3
Replace the
4
Follow the procedure from step 3 to step 10 in “Replacing the
5
Follow the procedure from step 2 to step 6 in “Replacing the
6
Replace the
7
Replace the
.
8
Replace the
.
9
Follow the procedure from step 3 to step 5 in “Replacing the
”.
10
Replace the
.
11
Replace the
89
Summary of Contents for Inspiron 15-3559
