Replacing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1
Place the fan on the heat sink.
2
Adhere the tape that secures the fan to the heat sink.
3
Turn the cooling assembly over.
4
Replace the screws that secure the fan to the heat sink.
Post-requisites
1
Follow the procedure from step 2 to step 4 in “Replacing the
”.
2
Follow the procedure from step 3 to step 10 in “Replacing the
3
Follow the procedure from step 2 to step 6 in “Replacing the
4
Replace the
5
Replace the
.
6
Replace the
.
7
Follow the procedure from step 3 to step 5 in “Replacing the
”.
8
Replace the
9
Replace the
.
69
Summary of Contents for Inspiron 15-3559
