Steps
1. Using the alignment posts, place the speakers on the palm-rest and keyboard assembly.
NOTE:
Ensure that the alignment posts are threaded through the rubber grommets on the speaker.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3. Connect the speaker cable to the system board.
Next steps
1. Install the
.
2. Install the
.
After working inside your computer
.
Hard drive assembly
Removing the hard drive
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
About this task
The following images indicate the location of the hard drive and provide a visual representation of the removal procedure.
36
Removing and installing components
