Steps
1. Connect the battery cable to the system board.
2. Adhere the tape that secures the battery cable to the battery.
3. Place and snap the base cover into place on the palm-rest and keyboard assembly.
4. Tighten the two captive screws that secure the base cover to the palm-rest and keyboard assembly.
5. Replace the five screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly.
Next steps
After working inside your computer
.
Battery cable
Removing the 3-cell battery cable
Prerequisites
Before working inside your computer
.
2. Remove the
.
About this task
The following image(s) indicate the location of the 3-cell battery cable and provides a visual representation of the removal
procedure.
16
Removing and installing components
