3. Remove the power-adapter port cable from the routing guide on the palm-rest and keyboard assembly.
4. Remove the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
5. Lift the power-adapter port along with its cable, off the palm-rest and keyboard assembly.
Installing the power-adapter port
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the installation
procedure.
Steps
1. Place the power-adapter port into the slot on the palm-rest and keyboard assembly.
2. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
3. Route the power-adapter port cable through the routing guide on the palm-rest and keyboard assembly.
4. Adhere the tape that secures the power-adapter port cable to the system board.
5. Connect the power-adapter port cable to the system board.
6. Close the right display-hinge.
Next steps
1. Install the
.
2. Install the
.
After working inside your computer
.
4. Exit
.
Removing and installing components
43
