Dell Inspiron 14 5000 Series Service Manual Download Page 25

Page: 25 / 115

GUID-98068FC2-1C1C-46DE-B3FA-DF9D488E9BA1

Removing the base cover

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before

working inside your computer

. After working inside your computer, follow

the instructions in

After working inside your computer

. For more safety best

practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

GUID-97F13B2F-B13D-43F8-92D5-1A75EBC3DC5D

Prerequisites

Remove the

battery

Remove the

optical drive

Remove the

base cover

Follow the procedure from step 1 to step 3 in “

Removing the hard drive

”.

Remove the

wireless card

Remove the

keyboard

GUID-1F05B65F-19CC-4D09-9A66-5602BBD9B8A4

Procedure

Remove the screws that secure the base cover to the computer base.

Summary of Contents for Inspiron 14 5000 Series




















































































































Search results

Summary of Contents for Inspiron 14 5000 Series

Reviews:

Related manuals for Inspiron 14 5000 Series

Brands by name

Popular brands

Dell Inspiron 14 5000 Series, Service Manual

Search results

Summary of Contents for Inspiron 14 5000 Series

Reviews:

Related manuals for Inspiron 14 5000 Series

Brands by name

Popular brands