manualshive.com logo in svg

Dell Inspiron 1121, Service Manual, Page: 44 / 54

Share
Download
Dell Inspiron 1121 Service Manual Download Page 44

Great user manuals database on 

UserManuals.info

  

 

Replacing the Palm Rest  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Align the palm rest on the computer base and gently snap the palm rest into place.  
 

 

  

3.

Slide the touch pad cable and the power button board cable into their connectors on the system board and press down on the connector latch to secure 
the cables.  
 

 

  

4.

Replace the three screws that secure the palm rest to the computer base.  
 

 

  

5.

Follow the instructions from 

step 5

 to 

step 7

 in 

Replacing the Hard Drive

.  

 

 

  

6.

Replace the keyboard (see 

Replacing the Keyboard

).  

 

 

  

7.

Close the display and turn the computer over.  
 

 

  

8.

Replace the four screws that secure the palm rest to the computer base.  
 

 

  

9.

Replace the two rubber caps that cover the palm rest screws on the computer base.  
 

 

  

10.

Replace the battery (see 

Replacing the Battery

).  

 

Back to Contents Page

 

 

 

1 

power button board cable connector 

2 

screws (3) 

3 

touch pad cable connector 

4 

plastic scribe 

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer. 

Summary of Contents for Inspiron 1121























































Reviews:

No comments