3.
Connect the coin-cell battery cable to the system board connector.
4.
Replace the Bluetooth card (see
Replacing the Bluetooth Card
).
5.
Replace the palm rest bracket (see
Replacing the Palm Rest Bracket
).
6.
Replace the memory module (see
Replacing the Memory Module
).
7.
Replace the hard drive (see
Replacing the Hard Drive
).
8.
Connect the speaker cable to the speaker cable connector on the I/O board (see
Replacing the Speakers
).
9.
Replace the palm rest (see
Replacing the Palm Rest
).
10.
Replace the keyboard (see
Replacing the Keyboard
).
11.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.