manualshive.com logo in svg

Dell Inspiron 1090, Service Manual

Share
Download
Dell Inspiron 1090 Service Manual Download Page 17

10.

Replace the keyboard (see 

Replacing the Keyboard

).  

 

 

  

11.

Replace the label door (see 

Replacing the Label Door

).  

 

 

 

 

Hinge Caps  

 

 

Removing the Hinge Caps 

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the display assembly (see 

Removing the Display Assembly

).  

 

 

  

3.

Press and lift the hinge caps to release the hinge-cap tabs from the display frame. Note the routing of the cables that are routed beneath the hinge 
caps.  
 

  

 

 

Replacing the Hinge Caps 

 

 

1.

Place the cables in position over the display hinges.  
 

 

  

2.

Place the hinge caps in position and snap them into place.  
 

 

  

3.

Replace the display assembly (see 

Replacing the Display Assembly

).  

 

 

 

 

Display Bezel  

 

 

Removing the Display Bezel 

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the display assembly (see 

Removing the Display Assembly

).  

 

 

  

3.

Remove the hinge caps (see 

Removing the Hinge Caps

).  

 

 

 

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer.

1 

hinge caps (2) 

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer.

Summary of Contents for Inspiron 1090















































Reviews:

No comments

Brands by name

Popular brands

Load more brands