manualshive.com logo in svg

Dell iDRAC7, User Manual

The Dell iDRAC7 User Manual is a comprehensive guide to efficiently manage your Dell server remotely. This manual is available for free download at manualshive.com, providing step-by-step instructions and troubleshooting tips for maximizing the potential of iDRAC7, ensuring seamless operations and improved productivity.

Share
Download
background image

19

Troubleshooting Managed System Using iDRAC7

You can diagnose and troubleshoot a remote managed system using:

•

Diagnostic console

•

Post code

•

Boot and crash capture videos

•

Last system crash screen

•

System event logs

•

Lifecycle logs

•

Front panel status

•

Trouble indicators

•

System health

Related Links

Using Diagnostic Console
Scheduling Remote Automated Diagnostics
Viewing Post Codes
Viewing Boot and Crash Capture Videos
Viewing Logs
Viewing Last System Crash Screen
Viewing Front Panel Status
Hardware Trouble Indicators
Viewing System Health
Generating Tech Support Report

Using Diagnostic Console

iDRAC7 provides a standard set of network diagnostic tools that are similar to the tools included with Microsoft 
Windows or Linux-based systems. Using iDRAC7 Web interface, you can access the network debugging tools.
To access Diagnostics Console:

1.

In the iDRAC7 Web interface, go to Overview

 → 

Server

 → 

Troubleshooting 

→ 

Diagnostics.

2.

In the Command text box, enter a command and click Submit. For information about the commands, see the 

iDRAC7 

Online Help

.

The results are displayed on the same page.

Scheduling Remote Automated Diagnostics

You can remotely invoke automated offline diagnostics on a server as a one-time event and return the results. If the 
diagnostics require a reboot, you can reboot immediately or stage it for a subsequent reboot or maintenance cycle 
(similar to updates). When diagnostics are run, the results are collected and stored in the internal iDRAC storage. You 
can then export the results to an NFS or CIFS network share using the 

diagnostics export

 racadm command. 

227

Summary of Contents for iDRAC7





























































































































































































































































Reviews:

No comments

Related manuals for iDRAC7

Zolix Instruments SC300 Operation Manual preview
SC300
Brand: Zolix Instruments Pages: 22
Galcon 6100 Series Installation And Operating Instructions Manual preview
6100 Series
Brand: Galcon Pages: 32
S&C 6802 Application Manual preview
6802
Brand: S&C Pages: 8
OMC W150 Installation And Maintenance Instruction preview
W150
Brand: OMC Pages: 18
Radware Alteon Installation And Maintenance Manual preview
Alteon
Brand: Radware Pages: 98
YASKAWA Motoman MLX200 Hardware Installation & Software Upgrade preview
Motoman MLX200
Brand: YASKAWA Pages: 121
YASKAWA Varispeed f7 Technical Manual preview
Varispeed f7
Brand: YASKAWA Pages: 17
YASKAWA 1000-Series Installation Manual preview
1000-Series
Brand: YASKAWA Pages: 30
Davey Torrium 2 TT45 Installation And Operating Instructions Manual preview
Torrium 2 TT45
Brand: Davey Pages: 12
HQ Power VDPLC010 User Manual preview
VDPLC010
Brand: HQ Power Pages: 23
Guangdong Schen Investment RC-M2 User Manual preview
RC-M2
Brand: Guangdong Schen Investment Pages: 15
TE Connectivity AMP 3K/40 CE 2161600-1 Original Instructions Manual preview
AMP 3K/40 CE 2161600-1
Brand: TE Connectivity Pages: 29
GCE Druva MTLX Instructions For Use Manual preview
Druva MTLX
Brand: GCE Pages: 46
Tusa RS-790 Owner'S Manual preview
RS-790
Brand: Tusa Pages: 72
Danfoss 080Z0130 Manual preview
080Z0130
Brand: Danfoss Pages: 96
Edge Electrons EDGEIQ EE-202-0050 Installation, Commissioning And Operation Manual preview
EDGEIQ EE-202-0050
Brand: Edge Electrons Pages: 32
mikroElektronika BIGdsPIC6 User Manual preview
BIGdsPIC6
Brand: mikroElektronika Pages: 28
ZIEHL-ABEGG Acontrol PSET6 Operating Instructions Manual preview
Acontrol PSET6
Brand: ZIEHL-ABEGG Pages: 24

Brands by name

Popular brands

Load more brands