![Dell IDRAC6 User Manual Download Page 338](http://html.mh-extra.com/html/dell/idrac6/idrac6_user-manual_81842338.webp)
338
RACADM Subcommand Overview
Examples
•
racadm config -g cfgLanNetworking -o
cfgNicIpAddress 10.35.10.110
Sets the
cfgNicIpAddress
configuration parameter (object) to the value
10.35.10.110. This IP address object is contained in the group
cfgLanNetworking
.
•
racadm config -f myrac.cfg
Configures or reconfigures iDRAC6. The
myrac.cfg
file may be created
with the
getconfig
command. The
myrac.cfg
file may also be edited
manually as long as the parsing rules are followed.
NOTE:
The
myrac.cfg
file does not contain passwords. To include passwords
in the file, you must enter them manually. If you want to remove passwords
from the
myrac.cfg
file during configuration, use the
-p
option.
getconfig
The
getconfig
subcommand allows you to retrieve iDRAC6 configuration
parameters individually, or all iDRAC6 configuration groups may be retrieved
and saved into a file.
Input
getconfig
subcommand options.
NOTE:
The
-f
option without a file specification will output the contents of the file to
the terminal screen.
Table A-4.
getconfig Subcommand Options
Option
Description
-f
The
-f
<
filename
>
option directs
getconfig
to write the entire iDRAC6
configuration to a configuration file. This file can then be used for batch
configuration operations using the
config
subcommand.
NOTE:
The
-f
option does not create entries for the
cfgIpmiPet
and
cfgIpmiPef
groups. You must set at least one trap destination to capture the
cfgIpmiPet
group to the file. Also,
cfgIpmiPet
and
cfgIpmiPef
will be saved
only by remote and telnet/ssh RACADM and not by local RACADM in this
current release.
Summary of Contents for IDRAC6
