38
| Removing
the
Coin-Cell
Battery
Removing the Coin-Cell Battery
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
WARNING: The coin-cell battery may explode if installed incorrectly.
Replace the coin-cell battery only with the same or equivalent type. Discard used
coin-cell batteries according to the manufacturer’s instructions.
CAUTION: Removing the coin-cell battery resets the BIOS settings to default. It is
recommended that you note the BIOS settings before removing the coin-cell
battery.
Prerequisites
1
Remove the battery. See "Removing the Battery" on page 10.
2
Follow the instructions from step 1 to step 2 in "Removing the Memory Module(s)"
on page 12.
3
Remove the hard-drive assembly. See "Removing the Hard-Drive Assembly" on
page 18.
4
Remove the optical-drive assembly. See "Removing the Optical-Drive Assembly" on
page 15.
5
Remove the keyboard. See "Removing the Keyboard" on page 21.
6
Remove the palm-rest. See "Removing the Palm-Rest" on page 24.
7
Remove the system board. See "Removing the System Board" on page 34.
OM_Book.book Page 38 Thursday, May 9, 2013 1:34 PM