Removing the hard drive
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
CAUTION:
Hard drives are fragile. Exercise care when handling the hard drive.
CAUTION:
To avoid data loss, do not remove the hard drive while the computer is in sleep or on state.
Topics:
•
•
Prerequisites
1
Remove the
2
Remove the
Procedure
NOTE:
The latch on the hard-drive locking connector is fragile. Pulling the latch forcefully may damage the hard-drive locking
connector. Exercise care when handling the latch on the hard-drive locking connector.
1
Open the latch and disconnect the hard-drive cable from the system board.
2
Peel off the hard-drive cable from the computer base.
3
Remove the four screws (M2.5x3+3) that secure the hard-drive assembly to the computer base.
4
Lift the hard-drive assembly, along with its cable, off the computer base.
5
Disconnect the interposer from the hard-drive assembly.
17
32
Removing the hard drive
Summary of Contents for G5 15
